Pemko CFM95-HD1 Continuous Geared Hinge - Full Mortise, Heavy Duty
The Pemko CFM95-HD1 is an architectural-grade heavy-duty full mortise hinge engineered to provide a lifetime of maintenance-free operation. Unlike standard butt hinges that concentrate stress on small areas of the frame, this anodized aluminum continuous hinge distributes the door's weight uniformly across the entire length of the opening. This design eliminates sagging, prevents door failure, and ensures a clean, concealed aesthetic for new construction applications.
High-Performance & Security Features
- Massive Weight Capacity: Designed for the most demanding applications, this heavy-duty hinge can support doors up to 540 lbs, making it the standard for lead-lined healthcare doors and oversized commercial entries.
- Advanced Gear Mechanism: Features inter-meshing gear segments that provide 50% more bearing surface than traditional hinges. This reduces wear, ensures symmetrical operation, and allows for an incredibly low operating force of 1/2 lb or less.
- Enhanced Security & Privacy: The sight-proof design conceals both leaves, reinforcing the full length of the door and frame to prevent tampering, while also providing maximum privacy in sensitive areas like executive offices or restrooms.
- Superior Durability: Extruded from 6063-T6 aluminum and anodized after machining, the hinge surfaces are harder and smoother to minimize friction and extend the lifespan of the hardware.
- Pinch-Point Prevention: The continuous profile helps prevent fingers from being trapped in the hinge side of the door, making it an essential safety feature for schools and daycare centers.
Technical Specifications
- Manufacturer: Pemko (ASSA ABLOY)
- Model: CFM95-HD1 (Full Mortise)
- Finish: Clear Anodized (modern, corrosion-resistant look)
- Dimensions: 25/32" Width | 2-9/16" Height
- Fasteners: No. 12-24 x 7/16" FHUC Type C thread-forming screws (no tapping required)
- Certifications: BHMA Certified, Fire Rated (equipped with FirePins for fire-rated assemblies).
Pro-Tip for New Installations
The Pemko CFM95-HD1 is designed for new door applications because the door must be slightly undersized to accommodate the hinge thickness within the mortise. For example, a standard 3'0" door (typically 35-3/4" wide) should be undersized to 35-1/2" or 35-9/16" for a perfect fit. This extra clearance ensures the door swings freely without binding while maintaining a tight, professional reveal.
| Length | 95 Inch |
| Continuous Hinge Height | 95 Inch (8/0 Dr) |
| Brand | Pemko |
| Continuous Hinge Grade | Heavy Duty |
| Hinge Type | Full Mortise, Continuous Hinge |
| General - US Finishes | US28 - 628/ Anodized Aluminum |
Recently Viewed Items