Hager Ecco ECBB1102 NRP 5 x 4 1/2 Full Mortise - Ball Bearing Hinge, Heavy Weight, Steel with US26D Finish.
5" height x 4 1/2" width
Furnished standard with 1/2 wood screws (1 1/4" x 12 FPHW) and All machine screws (1/2" 12-24 FPHM)
Hinges are .188 thickness, For 1 3/4" door thickness. For use on heavy weight doors or doors requiring high frequency service.
Material:
- Steel with Steel pin
- Non-rising removable pin with button tip and plug
- Four ball bearings
ANSI A8111
Non-Removable Pin (NRP) for Medium Security
The Non-Removable pin has a small set screw in the body of the barrel. This set screw is tightened down against the pin. The pin has a groove in the position where the set screw makes contact, allowing the set screw to seat. The set screw is positioned so it cannot be reached unless the door is opened. If pin removal is necessary, the set screw is merely removed and the pin tapped from the bottom in the usual manner.
| General - US Finishes | US26D - Satin Chrome |
| Brand | Hager |
| Hinge Height | 5.0" Hi |
| Hinge Width | 4.5" Wi |
| Hinge Grade/Thickness | Heavy Wt .180 to .190 |
| Hinge Type | Full Mortise |
| Hinge Options | Ball Bearing, NRP (Non Removable Pin) |
| Base Material | Steel |
| Hinge Corners | Square |