?unique=eec12da)
Pemko 18100CNB Nylon Brush Sill Sweep, Aluminum, Gray Nylon Brush Insert
Brush gasketing products consist of dense type 6 nylon bristles. These gasketing products will conform to irregular surfaces making it an excellent product to seal almost any opening using a minimal closing force.
Brush Door Sweeps are designed to seal the gap between the bottom of the door and the top of the threshold or floor surface. They are usually supplied with a flat flange. The flat flange provides the best contact between the brush and the threshold or floor surface.
All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes supplied with black brush.
All brush seals consist of densely compressed nylon filaments encased in high quality aluminum retainers. These products are ideally suited for hollow metal and wood door (in-door sweep, jamb/header gasketing, and split astragal) applications. Also use Pemko brush weatherstripping products on overhead doors, sectional doors, sliding doors, and automatic doors.
All brush seals greatly reduce the infiltration of light, air, wind, rain, and snow; prevent heat loss; control the penetration of smoke and fumes.
The dense nylon filaments conform to the contours of every sealing surface, providing a superior seal with extremely low closing force.
Brush remains flexible down to -40°F and has a melting point above 400°F.
UV stabilized, dependable, long-lasting, cost-effective.
Nylon brush insert is designated by a NB following the finish code.
All brush seals come with #6 x 5/8" stainless steel sheet metal screws.
Punched with slotted holes for adjustment (except 35° angle types which are drilled with 1/8" hole).
Replacement Insert P38100 (Black or Gray)
Certified Greenguard Gold for Low Chemical Emissions: Certificate 44557
ANSI NUMBER: R3A435
Please request a quote for Optional Finishes:
D - Dark Bronze Anodized Aluminum with Black Nylon Brush insert
G - Gold Anodized Aluminum with Black Nylon Brush insert
PW - Painted White Aluminum with White Nylon Brush insert
PRODUCT APPROVALS:
• Tested and approved under UL10C for Fire; UL1784 for Smoke
• BHMA A156.22
• Category J and H gaskets for use with classified steel covered composite, hollow metal doors rated up to and including 3 hours; wood and plastic covered composite doors rated up to and including 1-1/2 hours; and wood core doors rated for 20 minutes without hose stream.
| Length | 36 Inch or 48 Inch |
| Brand | Pemko |
| Insert Material | Nylon Brush |
| Material Length | 1" |
| Bottom Weatherseal Type | Sill Sweep |
| Housing Length | 7/8" |
| Housing Finish | Aluminum |
| Fire Rated | Fire Rated |
| Smoke Rated | Smoke Rated |