SDC ELR Kit for Arrow, LR100AWK

Price:

627.30


Sargent Replacement Push Pad 809
Sargent Replacement Push Pad 809
54.00
54.00
SDC ELR Kit for Detex, LR100DXK
SDC ELR Kit for Detex, LR100DXK
627.30
627.30

SDC ELR Kit for Arrow, LR100AWK

https://www.doorwaysplus.com/web/image/product.template/1765/image_1920?unique=8da339c

SDC ELR Kit for Arrow, LR100AWK

627.30 627.3000000000001 USD 627.30

627.30

Not Available For Sale


  • Brand
  • Part Type
  • Voltage

This combination does not exist.


Share :

SDC Electric Latch Retraction Kit for Arrow Devices, LR100AWK

Compatible with the following models / series of Arrow Exit Device:

  • Rim Mounted - S1250
  • Surface Vertical Rod - S1150

The SDC LR100 Series Electric Latch Retraction Kit enables electric access control and dogging of mechanical exit devices. When energized the motor retracts the exit device latch and pulls the pushpad into the dogged (depressed) position enabling momentary or sustained push and pull operation of the door. The latch retraction mechanism may be activated by an access control, remote control device or building automation system. The exit device always provides uninhibited egress.

Field Installed Retrofit Kits:

  • UL Classified for use with 3hr fire rated & non-fire rated exit devices

Features:

  • Low 700 mA Inrush, 200 mA Continuous @ 24VDC
  • For access control and sustained dogging applications
  • Simultaneous latch retraction and dogging (pushpad depressed*) for most exit devices
  • Pushpad is depressed* electrically for quieter push / pull operation
  • Automatic re-trigger if device does not pull on first try

*** IMPORTANT NOTE: Electric pushpad depression not available with Corbin Russwin, Yale, Adams Rite and Sargent. Meaning it only retracts the latch, as opposed to pulling/ drawing the push bar in while retracting the latch simultaneously. ***

Benefits:

  • Eliminates need for costly replacement of existing exit device
  • Significantly less labor and costs compared to competitive retrofit kits
  • Eliminates need for costly power supplies with high inrush circuitry. Compatible with UL Listed Access Control Power Supply
  • Only 1 Amp power supply required for up to 2 exit devices
  • Low current enables longer wire runs with smaller gauge wire
  • No door sequencers required for pairs of manual doors


Brand SDC
Part Type Electric Latch Retraction Kit
Voltage 24 VDC
SDC LR100 Series Data Sheet
Download
SDC LR100 Series Installation Instructions
Download