)?unique=9021e18)
Detex Surface Mount Exit Alarm ECL-230X
EXIT CONTROL LOCKS
ECL-230X (Dead Bolt) Exit Control Hardware - Single Point Lock
The ECL-230X is a code compliant, battery alarmed, rugged dead bolt, panic device with photo-luminescent sign providing maximum security and a 100 decibel alarm for secondary exits.
Benefits
- Attack resistant design for maximum holding force
- Proven durability and reliability at a reasonable price
- Easy to install
- Reduces employee and customer theft
- Time tested construction resists attack from the inside
- One size fits 36”-48” doors for code compliant acceptance
- For additional security with 4 locking points, specify ECL-230X-DX3
- Easy to see if the lights go out
- Straightforward operation that everyone understands
Features
- Deadbolt lock -1” throw with just over 3/4” engagement with the frame
- Saw resistant deadbolt
- Corrosion resistant alloy lock body
- 100 decibel alarm, powered by 9-volt battery (included)
- Surface/flush reversible strike
- Accepts 5-pin through 7-pin standard and interchangeable core rim cylinders without using cylinder collar
- Durable photo-luminescent sign absorbs light to then "glow in the dark" when lights are dimmed
- Locking and unlocking (dead bolt) always arms and disarms the alarm
- Non-handed
- Low profile meets International Building Code requirement allowing for 4” maximum projection off face of door
- Resetting the alarm can only be accomplished with a control key
- For 9VDC hardwiring add BE-961-1 or BE-961-2
- 10 Year Limited Manufacturers Warranty
Mechanical Options
- Gray Finish (Std.)
- H - Hurricane Rated
- W - Weatherized Unit - Weatherized electronics certified to Driving Rain and Salt Fog Test
- 30 - Fits 30” wide door
- DX1 - Add hinge side protection with one hinge bolt for 2 locking points (3/4” frame engagement)
- DX2 - Add hinge side protection with two hinge side bolts for 3 locking points (3/4” frame engagement)
- DX3 - For maximum hinge side protection add three hinge side bolts for 4 locking points (3/4” frame engagement)
- English Push Plate Sign (Std.) other languages available
- 03T - Outside Trim Plate
- 03PP - Outside Pull Plate Rim cylinder required for 03 Trims
- 01T - Outside Trim Plate
- 01PP - Outside Pull Plate
- IC7R - Interchangeable core housing installed in Lock & or Trim
- IK7R - InstaKey Cylinder installed in Lock & or Trim
- RC65 - Rim Cylinder, Schlage “C” Keyway with 2 keys installed in Lock & or Trim
- IP - Inside Pull, Provides grip handle on inside of door, assists in pulling door closed and locking door
- DDSK - Double Door Strike Kit
- SN1 - Sex Nut Kit
- CL - Cover Lock (Standard on TB configuration) Provides additional protection for battery protection
- SS - Security Screws
- CL-SS - Cover Lock & Security Screws
- RK - ECL-230D RetroFit Kit (End-cap plate & lock-body plate)
- BE-961 - Hardwired Conversion Kit, eliminates battery
| Exit Alarm Options | W - Weatherized Unit or H - Hurricane Rated with SN1 Sex Nut Kit or DX1 - 1 DX Bolt - Hinge Side Locking Dead Bolt or DX2 - 2 DX Bolt - Hinge Side Locking Dead Bolt or DX3 - 3 DX Bolt - Hinge Side Locking Dead Bolt or 30" - 30" thru 35" wide door or RC65 - Rim Cylinder Schlage C Kwy (5 Pin) Installed or IC7R - Rim Cylinder SFIC Prep Less Core Installed or IP - Inside Pull or DDSK - Double Door Strike Kit or SN1 - Sex Nut Kit or CL - Cover Lock & 2 Keys (Installed) or SS - Security Screws or 01PP - Pull Plate without OKC (Dummy Pull) or 01T - Trim Plate without OKC (Blank Plate) or 03PP - Pull Plate with OKC - Less Cylinder or 03T - Trim Plate with OKC - Less Cylinder or 03PP - Pull Plate with OKC - with Cylinder or 03T - Trim Plate with OKC - with Cylinder |
| Exit Alarm Sign Language | RWE - English (Standard) or RWS - Spanish |
| Brand | Detex |