Hager Ecco ECBB1101 NRP 4 1/2 x 4 1/2 Full Mortise - Ball Bearing Hinge, Stainless Steel.
Furnished standard with 1/2 wood screws (1 1/4" x 12 FPHW) and All machine screws (1/2" 12-24 FPHM)
Hinges are .134 thickness, For 1 3/4" door thickness. For use on medium weight doors or doors requiring low frequency service.
Stock finish is US32D Stainless Steel. Other finishes available by quote include: US15, US26D & US26.
- Non-rising removable pin with button tip and plug
- Two ball bearings
Material:
-Brass with Stainless Steel pin ANSI A2112
-Stainless Steel with Stainless Steel pin ANSI A5112
Hager Companies standard grade stainless steel is type 304L. This Hinge is now available with Type 316 grade Stainless Steel - for superior corrosion resistance or for use in high corrosive areas.
Non-Removable Pin (NRP) for Medium Security
The Non-Removable pin has a small set screw in the body of the barrel. This set screw is tightened down against the pin. The pin has a groove in the position where the set screw makes contact, allowing the set screw to seat. The set screw is positioned so it cannot be reached unless the door is opened. If pin removal is necessary, the set screw is merely removed and the pin tapped from the bottom in the usual manner.
General - US Finishes | 630 - Satin Stainless Steel/ US32D or US32D - Type 316 Stainless Steel |
Brand | Hager |
Hinge Height | 4.5" Hi |
Hinge Width | 4.5" Wi |
Hinge Grade/Thickness | Standard Wt .119 to .146 |
Hinge Type | Full Mortise |
Hinge Options | Ball Bearing, NRP (Non Removable Pin) |
Base Material | Stainless Steel |
Hinge Corners | Square |