?unique=9a65247)
?unique=9a65247)
Pemko 315DN Sill Sweep with Neoprene insert 1/4" Width x 1-11/16" Height - Dark Bronze Anodized Aluminum Finish
Door sweeps are surface applied to the face of a door. They are commonly used on the exterior of outswing doors. Door sweeps are an effective way to enhance energy efficiency and provide additional protection from the elements for any outswing door. Sill Sweeps are customarily installed in conjunction with a flat or fluted threshold to ensure effective sealing and functionality. The Sill Sweep should be installed so as to clear the floor but contact the bevel of the threshold. The gap between the bottom of the door and the threshold can be 1/8" to 3/8" and sometimes higher based on field conditions.
Key Applications for Door Sweeps
- Weather Protection: By sealing the gap at the bottom of the door, sweeps help maintain the desired indoor temperature.
- Pest Prevention: They act as a deterrent against insects and small pests.
- Energy Efficiency: By reducing drafts, they help lower energy costs.
• Sill Sweeps are punched with elongated slotted holes for easy adjustment. Furnished with #6 x 5/8" Pan Head SMS
• The Neoprene Insert operates effectively within a temperature range of -75° to +350° F. (-59 to 176 Celsius)
• Stops airflow from escaping or entering beneath the door
• This Sill Sweep is supplied with a Black Neoprene insert - item number E315 (please note: this was redesigned in 2019, new insert will not fit old design)
• This material is not advisable for applications involving substantial amounts of gasoline, fuel oil, kerosene, propane, or mineral oil.
• ANSI: R3B434, R3B435
WIDTH: 1/4" (6.4 mm)
PROFILE HEIGHT: 1-1/4" (31.8 mm)
TOTAL HEIGHT WITH INSERT: 1-11/16" (42.9 mm)
Please request a quote for Optional Finishes, length and/or Insert Material:
B - Mill Finish Extruded Bronze (Brass) with Black Neoprene insert
G - Gold Anodized Aluminum with Black Neoprene insert
10BE - Dark Bronze Powder Coated Aluminum with Black Neoprene insert
WSP - White Suede Powder Coat Aluminum with Black Neoprene insert
SS - #4 Finish Stainless Steel with Black Neoprene insert
PRODUCT TESTING:
• Certified GREENGUARD Gold for Low Chemical Emissions
• Air Infiltration Tested – Tested to ASTM E-283-04 (2012) for low air leakage allowance; allows no more than 0.3 cfm per square foot at 1.57 psf.
• Sound Tested – Tested to ASTM E90 – 2009 in a single or in multiple sound seal configurations for sound attenuation in an opening
• Smoke Tested – Tested to UL 1784 and meets the requirements of NFPA 105-2013 for smoke leakage in an opening; allows no more than 3.0 cfm per square foot at 0.10” water column (about 75 Pa).
• Fire Rated – Tested to UL10B Standard Fire Tests and UL10C Positive Pressure Fire Tests of Door Assemblies
• BHMA Certified – Tested for performance with regards to the requirements in:
• ANSI/BHMA A156.22 – Door Gasketing and Edge Seal Systems
| Length | 36 Inch or 48 Inch |
| Brand | Pemko |
| Insert Material | Neoprene |
| Material Length | 7/16" |
| Housing Length | 1-1/4" |
| Housing Finish | Dark Bronze |
| Bottom Weatherseal Type | Sill Sweep |
| Fire Rated | Fire Rated |
| Smoke Rated | Smoke Rated |