Hager Hinge BB1279 NRP SH 4-1/2 x 4-1/2 Security Stud US26D
Hager Hinge BB1279 NRP SH 4-1/2 x 4-1/2 Security Stud US26D Satin Chrome Finish. Hinges are priced as Each.
Hager Hinge BB1279 NRP SH 4-1/2 x 4-1/2 Security Stud US26D Satin Chrome
The Security Stud (SH) 3/16” (4.8 mm) projection is a feature that places a stud on one leaf and a locking hole on the other leaf. When the door is closed, the stud is anchored into the opposite leaf. Even if the hinge pin is removed, the door is secure because the leaves are locked together.
The Non-Removable Pin (NRP) has a small set screw in the body of the barrel. This set screw is tightened down against the pin. The pin has a groove in the position where the set screw makes contact, allowing the set screw to seat. The set screw is positioned so it cannot be reached unless the door is opened. If pin removal is necessary, the set screw is merely removed and the pin tapped from the bottom in the usual manner.
Furnished standard with All wood screws (1 1/4" x 12 FPHW) and All machine screws (1/2" 12-24 FPHM)
Torx or Spanner Head Screws are available for additional amount.
Hinges are .134 thickness, For 1 3/4" door thickness. For use on medium weight doors or doors requiring low frequency service.
Stock finish is US26D Satin Chrome. Other sizes and finishes are available by quote.
Material:
- Steel with Steel pin
- Non-rising removable pin with button tip and plug
- Two ball bearings
ANSI A8111
Hinges are priced as Each.
| General - US Finishes | US26D - Satin Chrome |
| Brand | Hager |
| Hinge Height | 4.5" Hi |
| Hinge Width | 4.5" Wi |
| Hinge Grade/Thickness | Standard Wt .119 to .146 |
| Hinge Type | Full Mortise |
| Hinge Options | Ball Bearing, NRP (Non Removable Pin), SH or SSF (Security Stud) |
| Base Material | Steel |
| Hinge Corners | Square |